November 6, 2009

Rebuilding a trailer for an Albin 27 (part 1)

Our friends from OK, Larry & Diane, bought “Rabble” an Albin 27 that was located here in FL. They brought a trailer with them…unfortunately it wasn’t setup for an Albin.

Startcs

So..Jim offered to trade ours for theirs.  This will give Jim time to figure out how to remodel.

The bunks had to be removed.

bunks removed

The bow roller was reversed so it would reach the bow.

bow roller reversed

Uprights for the bunks had to be made taller and adjustable.

003cs

The keel will sit on one of the bunks…it will have to have risers to fit the shape of the keel.  and the bunks on the side are made so they can follow the shape of the hull.

007

Jim spends a lot of time cutting…… drilling and welding.

cutting

He resto-rodded his ‘67 Chevy Pickup ..a frame up restoration with a ‘58 Chrysler Hemi in it….so he has most of the tools needed to do this. Although…he did buy a neat little drill press. He made all the adjustable brackets and each had to have 2 holes.